OSD Audio WSKSUB 5․8 GHz Wireless Subwoofer Kit Manual
Welcome to the official user manual for the OSD Audio WSKSUB 5․8 GHz Wireless Subwoofer Kit․ This manual provides detailed instructions for setting up, operating, and troubleshooting the device․ Please read carefully for optimal performance․
Overview of the OSD WSKSUB 5;8 GHz Wireless Subwoofer Kit
The OSD Audio WSKSUB 5․8 GHz Wireless Subwoofer Kit is designed to eliminate the need for long subwoofer cables, offering a convenient and clutter-free solution for adding deep bass to your home theater or audio system․ Operating on the less crowded 5․8 GHz frequency band, this kit ensures a stable and reliable audio transmission up to 100 feet line of sight, minimizing interference and providing high-quality sound․
This wireless subwoofer kit is ideal for both new and existing home theater setups, allowing you to place your subwoofer in the optimal location without worrying about cable runs․ The kit includes a transmitter and receiver pair, which are easy to set up and pair․ The WSKSUB is compatible with most powered subwoofers and AV receivers or pre-amps with subwoofer outputs․
With its digital, uncompressed audio transmission, the WSKSUB delivers pristine bass performance, enhancing your listening experience․ It supports a wide frequency response from 10Hz to 23kHz, ensuring accurate reproduction of low-frequency sounds․
Key Features and Benefits
The OSD Audio WSKSUB 5․8 GHz Wireless Subwoofer Kit offers several key features that make it an excellent addition to any audio setup․ Firstly, its 5․8 GHz wireless technology ensures a reliable and stable connection, minimizing interference for clear, uninterrupted bass․ The extended operating range of up to 100 feet line of sight provides flexibility in subwoofer placement, allowing you to optimize sound without cable limitations․
The kit’s uncompressed digital audio transmission preserves the quality of your audio, delivering deep and accurate bass․ Setting up the WSKSUB is simple, requiring minimal effort to integrate into existing systems․ Its compatibility with most powered subwoofers and AV receivers makes it a versatile choice for various setups․
Finally, the elimination of long cables reduces clutter and improves the aesthetics of your listening area․ The WSKSUB offers convenience, performance, and enhanced audio quality․
Package Contents
Upon opening the OSD Audio WSKSUB 5․8 GHz Wireless Subwoofer Kit, ensure that all the following items are present․ The package includes one (1) wireless transmitter, responsible for sending the audio signal from your AV receiver or amplifier․ You should also find one (1) wireless receiver, which connects to your powered subwoofer to receive the signal․
Two (2) power adapters are provided, one for the transmitter and one for the receiver, each with the appropriate voltage for operation․ Additionally, you will find one (1) RCA audio cable for connecting the transmitter to your audio source․ A user manual is included, offering detailed instructions on setup, operation, and troubleshooting․
If any of these items are missing or damaged, please contact OSD Audio customer support immediately for assistance․ Confirming all components are present ensures a smooth and successful setup process․
Setting Up the OSD WSKSUB Kit
This section guides you through the initial setup of your OSD WSKSUB kit․ Follow these steps to connect the transmitter and receiver, ensuring proper power and signal transmission․
Connecting the Transmitter
To begin, identify the transmitter unit within your OSD WSKSUB kit․ The transmitter is responsible for sending the audio signal from your AV receiver or amplifier to the subwoofer wirelessly․ Locate the audio output on your receiver, typically labeled “Subwoofer Pre Out,” “Sub Out,” or “SW Out․”
Connect one end of the provided RCA cable to this output․ If your subwoofer connection is a mono signal, you can leave the right RCA plug unconnected; Next, plug the other end of the RCA cable into the audio input on the WSKSUB transmitter․
Now, take the supplied USB A to Micro B cable․ Connect the Micro B end into the “POWER” port on the WSK SUB transmitter․ Plug the USB A end into the 5V 1A power supply and then plug the power supply into a 120V AC outlet․ Ensure the transmitter is powered on for successful signal transmission․
Connecting the Receiver
Next, focus on connecting the receiver unit of your OSD WSKSUB kit to your powered subwoofer․ Identify the receiver, which is responsible for receiving the wireless audio signal from the transmitter․
Locate the audio input on your powered subwoofer․ Typically, this will be an RCA input labeled “Line In” or “Subwoofer In”․ Connect one end of the provided RCA cable to the audio output on the WSKSUB receiver․ Then, connect the other end of the RCA cable to the audio input on your powered subwoofer․
Ensure a secure connection for optimal audio transmission․ Now, use the USB A to Micro B cable to power the receiver․ Plug the Micro B end into the “POWER” port on the WSK SUB receiver․ Connect the USB A end to the 5V 1A power supply and plug the power supply into a 120V AC outlet․ With both receiver and subwoofer powered, you’re ready for pairing․
Powering the Devices
Ensuring both the transmitter and receiver units of your OSD WSKSUB 5․8 GHz Wireless Subwoofer Kit are properly powered is crucial for seamless operation․ Begin by using the provided USB A to Micro B cables․
For the transmitter, plug the Micro B end of one cable into the “POWER” port located on the WSK SUB transmitter․ Connect the USB A end of the same cable into the 5V 1A power supply that came with the kit․ Then, plug the power supply into a standard 120V AC outlet․ The transmitter should now be receiving power․
Repeat this process for the receiver․ Plug the Micro B end of the second USB A to Micro B cable into the “POWER” port on the WSK SUB receiver․ Connect the USB A end to the remaining 5V 1A power supply, and plug it into a separate 120V AC outlet․ With both devices powered, proceed to the pairing stage․
Operating the OSD WSKSUB Kit
Once the transmitter and receiver are connected and powered, you’re ready to operate the OSD WSKSUB kit․ This section covers pairing, adjusting audio levels, and troubleshooting․
Pairing the Transmitter and Receiver
To ensure seamless audio transmission, the transmitter and receiver need to be properly paired․ The OSD WSKSUB kit typically comes pre-paired from the factory, but if they become unpaired, follow these steps:
- Ensure both the transmitter and receiver are powered on․
- Locate the “Pair” button on both units․ It is usually on the rear panel․
- Press and hold the “Pair” button on the transmitter for a few seconds until the LED indicator starts flashing rapidly․
- Immediately press and hold the “Pair” button on the receiver until its LED indicator also flashes rapidly․
- The devices will begin searching for each other․ Once the pairing is successful, the LED indicators on both the transmitter and receiver will become solid, indicating a stable connection․
- If the pairing fails, repeat the steps above․ Ensure that the transmitter and receiver are within close proximity during the pairing process․
Once paired, the OSD WSKSUB kit should automatically reconnect whenever both units are powered on․ If issues persist, consult the troubleshooting section․
Adjusting the Audio Output Level
Fine-tuning the audio output level is crucial for achieving optimal bass performance․ The OSD WSKSUB 5․8 GHz Wireless Subwoofer Kit provides controls for adjusting the subwoofer’s volume; To adjust the audio output level, follow these instructions:
- Locate the volume control knob on the receiver unit․ This is usually labeled “Level” or “Volume․”
- Start with the volume control set to a low level, typically around the minimum setting․
- Play audio through your system and gradually increase the volume level on the receiver until the subwoofer’s output blends seamlessly with the other speakers․
- Avoid setting the volume too high, as this can cause distortion or damage the subwoofer․
- If your subwoofer has its own volume control, adjust it in conjunction with the receiver’s volume to achieve the desired balance․
- Experiment with different volume levels to find the setting that best suits your listening preferences and the acoustics of your room․
Remember, subtle adjustments can make a significant difference in overall sound quality․ Consult your receiver or amplifier manual for additional audio settings․
Troubleshooting Common Issues
Even with proper setup, you might encounter occasional issues with your OSD WSKSUB 5․8 GHz Wireless Subwoofer Kit․ Here are some common problems and their solutions:
- No sound from the subwoofer: Check the power connections to both the transmitter and receiver․ Ensure the transmitter and receiver are properly paired․ Verify the audio cables are securely connected to your receiver and subwoofer․ Adjust the volume level on both the receiver and subwoofer․
- Intermittent sound or dropouts: Ensure the transmitter and receiver are within the specified range (100 ft line of sight)․ Minimize obstructions between the transmitter and receiver․ Try changing the channel on the transmitter and receiver․
- Distorted sound: Lower the volume level on both the receiver and subwoofer․ Check the audio cables for damage․ Ensure the subwoofer is not being overdriven․
- Humming or buzzing: Check the grounding of your audio equipment․ Try using a different power outlet․ Ensure the audio cables are shielded․
If these steps do not resolve the issue, consult the OSD Audio website or contact customer support for further assistance․
Technical Specifications
This section details the technical specifications of the OSD WSKSUB 5․8 GHz Wireless Subwoofer Kit, providing insight into its performance capabilities and power requirements for optimal use․
Frequency and Range
The OSD WSKSUB wireless subwoofer kit operates on the 5․8 GHz frequency band, which offers a less congested and more reliable connection than the 2․4 GHz band commonly used in other wireless devices․ This allows for a more stable audio transmission, minimizing interference from other wireless devices in your home․
The transmitter has an operating range of up to 100 feet, line of sight․ However, optimal performance is achieved within 50 feet, especially when transmitting through walls and ceilings․ Obstacles such as metal objects can affect transmission, potentially reducing the effective range․
The 5․8 GHz frequency band is less prone to interference from devices like microwaves and Bluetooth devices, ensuring a cleaner audio signal․ The kit utilizes digital, uncompressed, bidirectional, adaptive FHSS (Frequency Hopping Spread Spectrum) technology to further enhance signal stability and prevent signal loss․
For best results, position the transmitter and receiver within line of sight and away from potential sources of interference․ This will ensure a robust and reliable wireless connection for your subwoofer․
Audio Performance
The OSD WSKSUB 5․8 GHz Wireless Subwoofer Kit is engineered to deliver high-fidelity audio performance, ensuring a seamless integration of deep and powerful bass into your home audio system․ With a frequency response ranging from 10Hz to 23kHz, this kit accurately reproduces the full spectrum of low-frequency sounds, enhancing your listening experience․
The kit boasts a signal-to-noise ratio of 80dB, minimizing unwanted background noise and preserving the clarity of the audio signal․ The audio output level is set at 2V, providing ample power to drive most powered subwoofers․ The total harmonic distortion is typically -90dB, ensuring minimal distortion and a clean, accurate sound reproduction․
This wireless subwoofer kit uses digital, uncompressed audio transmission to maintain signal integrity and prevent audio degradation․ This results in a dynamic and immersive sound experience, free from the limitations of traditional wired connections․ This produces a high quality sound for your enjoyment․
Power Requirements
The OSD WSKSUB 5․8 GHz Wireless Subwoofer Kit is designed for efficient power consumption to minimize energy waste while ensuring optimal performance․ The transmitter and receiver units each require a 5V DC power supply at 1A․ A USB A to Micro B cable is provided to connect the transmitter to the power supply, which can then be plugged into a standard 120V AC outlet․
It is essential to use the supplied power adapters to avoid any potential damage to the units or compromise their performance․ Using alternative power supplies with incorrect voltage or amperage ratings may lead to malfunction or void the warranty․ The receiver unit also requires a similar 5V DC power supply at 1A, ensuring consistent and reliable operation alongside the transmitter․
Care should be taken to ensure both the transmitter and receiver are connected to a stable power source to prevent interruptions during use․
